CPR Face Shield / CPR Mask / CPR Protective Barrier / Rescue Breathers / Mouth to Mouth Breathing Mask / Mouth to Mouth Mask / Resuscitator / CPR Resuscitator Mask / CPR Kit / CPR Kits / CPR Medical Kit / CPR Emergency Kit / CPR Practice Kit / Pocket Size Resuscitator

 

 

Type And Size:

 

C3803 CPR Mask with Oxygen Inlet

* All materials are Latex Free

Dimension: 130 x 106 x 48mm

Operation temp:-18°C~40°C

Storage temp:-30°C~52°C

Storage relative humidity: <85%

Operation function: Inspiration/Expiration resistance less than4.5cmH2O at 50 LPM

Shipping Ctn size: 43*39*24CM

Qty per Ctn: 50PCS/CTN

G.W./N.W.: 7/6.3KGS (125G/PC )

 

Directions for use:

1. Remove mask from case

2. Unfold mask and check for airflow

3. Put the mask on patients face as shown

4. Blow into one way valve and observe chest rise

5. Remove mouth from valve to allow for exhalation. Repeat as per CPR guidelines

6. Use mask in inverted position for infant.                       

 

Caution:

1. This product should be used only by persons who have received adequate training and instructions from qualified medical personnel.

2. Connect the oxygen supply line if necessary.

3. In the presence of high oxygen concentrations, and explosion may be caused by naked flames, or by oil and grease on the resuscitator.

 

Warning:

If oxygen is used, do not smoke or use in the presence of sparking equipment or open flame.

 

Contents:

1. Foldable cushion mask with oxygen port

2. One-way valve

3. Disposable filter

4. Elastic head strap